Important Safety Instructions - HAMPTON BAY Home Depot 486-101 Manual De Instrucciones

Thank you for purchasing this Hampton Bay interior track light. This product has been
manufactured with the highest standards of safety and quality.
FEATURES:
1. Uses 12V, MR16 type 50W Xenon bulbs (Included).
2. Track head is multi-directional.
3. Adapter can be located anywhere along the track section.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service Team at 1-
877-527-0313 or visit www.homedepot.com. Please reference SKU 486-101, UPC
008938101868.
GENERAL:
1. Be sure to read these installation instructions and review the diagrams thoroughly
before installing the track system.
2. All electrical connections must be in accordance with local codes and the
National Electrical Code. If you are unfamiliar with methods of installing
electrical wiring, secure the services of a qualified licensed electrician.
3. Before starting the installation, disconnect the power by turning off the circuit
breaker or by removing the appropriate fuse at the fuse box. Turning the power
off using the light switch is not sufficient to prevent electrical shock.
Note: The important safeguards and instructions appearing in this manual are not meant to
cover all possible conditions and situations that may occur. It must be understood that
common sense, caution and care are factors that cannot be built into any product. These
factors must be supplied by the person(s) caring for, installing and operating the fixture. If
at any time you are uncomfortable or are unsure of what to do, please contact a qualified
licensed electrician for further assistance.

IMPORTANT SAFETY INSTRUCTIONS

1. Read all instructions. Save these instructions and refer to them when additions to
or changes in the track configuration are made.
2. Do not install any part of a track system less than7feet (2.2m) above the floor.
3. CAUTION: Do not install any fixture assembly closer than 6 inches (15.25cm)
from any curtain, or similar combustible material.
4. Do not attempt to energize anything other than lighting track fixtures on the track.
To reduce the risk of fire and electric shock, Please do not attempt to connect
power tools, extension cords, appliances and the like to the track.
5. Lighted lamp is hot! Turn off power and allow it to cool before replacing lamp.
Do not touch lamp at any time.
6. CAUTION: To reduce the risk of a burn, remove the fixture from the track
before re-lamping.
7. Use a soft cloth or re-lamping tools, Oil from skin may damage lamp.
8. For installation with HAMPTON BAY EC SERIES track systems only.
9. Lamp gets hot quickly! Contact only switch or plug when turning on. Do not
touch hot lamp lens.
10. CAUTION – Hot surface, keep away from curtains and other combustible
materials.
SAVE THESE INSTRUCTIONS
2