Installation Instructions - HAMPTON BAY 394-834 Manual De Instrucciones

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
3ea Screws (#8)

INSTALLATION INSTRUCTIONS:

1. Connect the ground wire from the fixture to the ground wire from the Post
(#10). Connect the white wire from the fixture to the white wire (neutral
wire) from the Post (#10). Connect the black wire from the fixture to the
black wire (live wire) from the Post (#10). Cover the connections using the
provided Wire Connectors (#9). Wrap the wire connections with electrical
tape for a more secure connection. Position the wires back inside the Post
Cap (#7).
electrical code for approved grounding methods.
2. Place the Post Cap (#7) onto the Post (#10). The Post (#10) should have a
2.5 inch diameter. Fasten the fixture to the Post (#10) by screwing the
provided Screws (#8) through the holes on the Post Cap (#7).
3. Installation is complete. Turn on the power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Page 6
3ea Wire Connectors (#9)
Note: If you have electrical questions, consult your local