IMPORTANT SAFETY INSTRUCTIONS
1. Be sure to read these installation instructions and review the diagrams thoroughly before installing the track
system.
2. For use with line voltage track system or with track section in SKU(939308)or SKU(939044);
3. To prevent the risk of fire and electric shock, do not attempt to connect power tools, extensions cords,
appliances, etc to the track system.
4. Do not install any part of this system (TRACK) less than 7 feet (2.2m) above floor.
SAVE THESE INSTRUCTIONS
INSTALLATION:
1. Push the top portion of the track luminaire into the slot of the track section, pull down the adapter's
locking tab (Fig.1).
Note: Turn the two copper conductors 90 degrees towards the ground groove on the track section.
2. Rotate the adapter 90 degrees to lock the track luminaire into track section (Fig. 2).
Fig.1
Fig.2
3