Korg Pa800 Manual Del Usuario página 4

4 Loading Pa800's Operating System and Musical Resources
Loading a .BKP file
Loading a .BKP file
To load a ".BKP" file, use the Media > Utility > Full Restore
Resources command.
Warning: Don't play the keyboard while restoring data, and stay in
the Media mode. Wait until the "Wait" message disappears.
Warning: Loading this file will delete your User data, so we suggest
you back-up your older data before upgrading. See "Backing-up
your older data" above.
1. Copy the file "Pa800_res_v[nnn].bkp" to an USB storage
device (like an USB pen or an external USB hard disk).
As an alternative, you can copy the file to the internal hard
disk of the Pa800 (if installed), by using the USB Device
port to connect your Pa800 to a personal computer.
2. In case you are restoring from an external USB device, con-
nect the device to one of the USB Host ports.
3. In the Media > Utility page, select the Full Restore
Resources command, then press Execute. The source device
appears.
4. If needed, select a different device, by using the Device
pop-up menu.
5. Browse through the files to find the backup file.
6. When the backup file (".BKP" file) is in the display, select it
and press the Restore command.
7. When done, turn the instrument off, then on again.
© 2008 Korg Italy SpA