Tools Required; Materials Required; Grounding The Refrigerator; Installation Instructions - Monogram ZWE23PSNBSS Instrucciones De Instalación

TOOLS REQUIRED

• Adjustable wrench
• 3/8" socket ratchet/driver
• Phillips head screwdriver
• Flat-Head ScrewdriveR
• 5/32", 3/32", 1/8", 1/4" Allen wrenches
• 1/8" Drill bit and electric or hand drill
• Tape measure
• Pencil
• Wire cutters
• 1/4" Nut driver
• Level
• Torx T20, T25

MATERIALS REQUIRED

• 1/4" O.D. compression nut and 2 ferrules (sleeves)
™
OR SmartConnect Refrigerator Tubing Kits

GROUNDING THE REFRIGERATOR

IMPORTANT – (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST
BE PROPERLY GROUNDED.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall receptacle to minimize the pos-
sibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
elec tri cian to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet is en coun tered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
6

Installation Instructions

FLOORING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is at the same
height as the rest of the flooring. This surface should be
strong enough to support a fully loaded refrigerator.
IMPORTANT NOTE: Protect the finish of the flooring.
Cut a large section of the cardboard carton and place
under the refrigerator where you are working.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
31-49161 Rev. 2