Installing The Ink Tanks - Canon imagePROGRAF PRO-300 Guía De Inicio

5
Remove the protective cap.
6
Set the print head in the print head holder.
7
Lower the print head lock lever completely.
Important
Once you have installed the print head, do not remove it
unnecessarily.

5. Installing the Ink Tanks

1
Remove the ink tank from the bag, and then
slowly remove the orange cap.
Important
•
Do not squeeze the sides of
the ink tank.
•
Do not touch the areas shown
in the figure.
2
Install the ink tank.
•
Insert the ink tank into the print head and press down
until it clicks.
3
Check that the color of the ink tank you installed
appears on the screen.
Important
If the color is not displayed on the screen even though you
have installed the ink tank, the color of the ink tank may be
wrong or you may have installed an ink tank, such as one
with a different model number, that is not supported by this
printer. Either install an ink tank for the correct color or use the
provided ink tank for setup.
3