Faucet
Stud
Bottom
Hose
Escutcheon
(Contemporary
Only)
O-Ring
Contemporary Faucet
1. Install the Faucet Body
Contemporary Faucet
Install the O-ring into the groove in the bottom of the escutcheon.
Slide the escutcheon over the hose and stud so it rests against the
faucet bottom.
Traditional Faucet
Install the O-ring into the groove in the bottom of the faucet
body.
All Installations
Position the hose and stud through the sink hole and position the
faucet over the sink hole.
From under the sink, slide the hole in the bracket onto the stud.
Tighten the nut against the bracket to secure the faucet body to
the sink.
If you are not installing the optional water filtration system,
proceed to the "Connect the Supply" section of this guide.
1015061-2-G
Faucet
Stud
Hose
Sink Hole
Bracket
Nut
Traditional Faucet
4
Kohler Co.