Descargar Imprimir esta página

ARENDO 302603/20180626FS013 Manual De Usuario página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Cleaning the ceramic filter system:
Clean the filter system regularly after a consumption of approx. 1000 litre of
water.
For this purpose, remove the filter from the tank cover and pour white vinegar
into a glass. Soak the filter for approx. 10 minutes in it. Subsequently, remove the
filter from the glass and shake it a few times until it is dry. Then thoroughly clean
the filter with water until the remains of vinegar are removed. After cleaning, the
filter can be installed again in the water tank. Store the tank in its original packag-
ing if you do not use the humidifier for a long period of time.
10. Troubleshooting
Error
The device cannot be switched on
• The device is switched on but the
humidification does not start
• The mist output is very low
The mist has a unusual smell
The water is draining out of the
device
16
Troubleshooting
Insert the mains plug into the socket
• Fill the water tank
• Ensure that the humidifier is placed on
an even surface
• Rotate the potentiometer clockwise to
increase the steam generation.
• Clean the tank and the atomiser
• Ensure that the water in the tank is not
stale. If this is the case, replace the wa-
ter in the tank
• Ensure that the tank cover is closed
correctly.
• Ensure that the tank is placed correctly
on the base unit.
English

Publicidad

loading