Safety Instruction About Fuse; How To Replace Fuse - Fanimation The Arden FP8014 Serie El Manual Del Propietario

1. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the
outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product
should be discarded or returned to an authorized
service facility for examination and/or repair.
1. Grasp plug and remove from the receptacle or
other outlet device. Do not unplug by pulling on
cord.
2. Slide open fuse access cover on top of
attachment plug towards blades (Figure 1).
3. Remove fuse carefully (Figure 2).
4. Slide closed the fuse access cover on top of
attachment plug.
▲WARNING
Risk of fire. Replace fuse only with 5 Amp, 125 Volt
fuse.
▲WARNING
Risk of fire. Do not replace attachment plug.
Contain a safety device (fuse) that should not be
removed. Discard product if the attachment plug
is damaged.

Safety Instruction About Fuse

How To Replace Fuse

2. Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility for
examination and/or repair.
3. Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
6
Figure 1
Figure 2