Principal Spare Parts - Sagola COMPACT 220 Manual De Instrucciones

The ordinary maintenance operations must be
carried out only by qualified personnel following the
instructions in this manual. Always cut the air supply
for maintenance or repair.
Ordinary maintenance operations are:
- Clean the working area, grid and discharge.
- Always maintain adequate levels of solvent in each
of the two tanks.
- Check and maintain clean the suction pump filter.
- Maintaining an adequate level cleaning of the
recirculation solvent. Change before accumulating
01. Gun washing detergent
Ref. 40000205
05. Full timer
Ref. 49000091
09. Washer injector kit
Ref. 49000108
13. Absorption filter
Ref. 49000489

12. PRINCIPAL SPARE PARTS

02. ON / OFF valves
spray or brush (2 units)
Ref. 49000087
06. Washing push button.
Clean solvent
Ref. 49000092
10. PNV23PNSNC
Valve
Ref. 49000295
13. Absorption filter
Ref. 49000495
excess waste and lost washing effectiveness. Once
the solvent substituted, the treatment of this should
follow the applicable regulations.
- Check for proper operation the safety devices and
operating controls.
Do the internal cleaning of the machine weekly.
Internal cleaning of the machine is done by using a
suitable solvent.
Do the cleaning of jets every three weeks. Disassem-
ble and immerse then in a clean solvent for about 1
hour. Wash with clean solvent from about 1 minute to
wash the pipes. Place the injectors clean.
03. 3/2 1/8" valves
07. Fixing clips for
guns (2 units)
Ref. 49000093
11. Cover shock absorber
Ref. 49000436
15. Metallic injector
Ref. 49000730
- 19 -
04. Full pneumatic pump
Ref. 49000088 Ref. 49000090
08. Pneumatic protection
terminals (2 units)
Ref. 49000099
12. Pressure regulator
Ref. 49000473
17. End stroke valve
16. Floculant 1 Kg
Ref. 55550047
Ref. 87560009