Marshall Kilburn Manual De Usuario página 27

REPLACING THE INTERNAL BATTERY
IF THE INTERNAL BATTERY IS BROKEN OR WORN OUT, YOU CAN REPLACE
IT WITH A NEW ONE. THE FAULTY BATTERY PACK MUST ALWAYS BE
RECYCLED ACCORDING TO LOCAL LAWS AND REGULATIONS.
001. MAKE SURE THAT THE POWER CORD IS UNPLUGGED FROM THE
WALL SOCKET.
002. DISCONNECTED THE POWER CORD FROM THE KILBURN POWER
SOCKET.
003. CAREFULLY PLACE THE KILBURN FRONT DOWN ON A FLAT, CLEAN
SURFACE.
004. USING A TORX SCREWDRIVER (SIZE T10), UNSCREW THE TWO
SCREWS ON THE BATTERY HATCH ON THE BOTTOM OF THE
LOUDSPEAKER.
005. OPEN THE BATTERY HATCH AND REMOVE IT FROM THE
LOUDSPEAKER.
004.
002.
NOTE: FULLY CHARGE
THE KILBURN BATTERY
BEFORE IT IS USED FOR
THE FIRST TIME.
004.