Safety Instructions; Hazard Levels; Electric Components - Kärcher AD 2 Manual De Instrucciones

Safety instructions

– Warning and information
plates on the machine pro-
vide important directions for
safe operation.
– Apart from the notes con-
tained herein the general
safety provisions and rules
for the prevention of acci-
dents of the legislator must be
observed.

Hazard levels

DANGER
Pointer to immediate danger,
which leads to severe injuries or
death.
WARNING
Pointer to a possibly dangerous
situation, which can lead to se-
vere injuries or death.
CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.

Electric components

DANGER
Risk of electric shock.
 Turn off the appliance and re-
move the mains plug prior to
any care and maintenance
works.
 Repair work and work on the
electrical components may
only be performed by an au-
thorised customer service.
 Never touch the mains plug
and the socket with wet
hands.
 Check the power cord with
mains plug for damage prior
to every use. Immediately
have damaged power cord
replaced by an authorised
customer service / electrician.
Do not operate an appliance if
the power cord is damaged.
 Do not use scouring agents,
glass or multi-purpose clean-
ers!
 Do not immerse the appli-
ance into water!
 Do not carry / transport the
appliance on the mains cable.
 Do not scrape the power cord
across sharp edges and en-
sure that it does not get
pressed.
 Do not remove the mains plug
from the socket by pulling on
the power cord.
WARNING
 The appliance may only be
connected to an electric sup-
ply that has been installed by
an electrician in accordance
with IEC 60364.
 The appliance may only be
connected to alternating cur-
rent. The mains voltage must
correspond with the voltage
indicated on the type plate.
 For safety reasons, we rec-
ommend that you operate the
appliance only via a residual
current device (max. 30 mA).
– 6
EN 13