Care And Maintenance; Troubleshooting; Technical Specifications - Kärcher AD 2 Manual De Instrucciones

Care and maintenance

 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 If required, rinse the container and accessories
with water properly and dry them before reuse.
Clean flat fold filter
Note
The flat fold filter is located in the filter basket.
Illustration
 Remove the appliance head. Remove the frame
and filter and knock the dirt out of the filter. Clean
the filter under running water if necessary. Do not
rub or brush the filter dry.
Let it dry completely prior to installation.
H
2
Illustration
 After that, insert the filter first and then the frame.
Insert and lock the appliance head.
Replacing exhaust filter
Recommendation: In order to ensure good filtration,
replace the exhaust filter once a year.
I
1
Illustration
 Press the side lugs of the exhaust grille inwards.
 Take off exhaust grille with exhaust filter.
 Remove exhaust filter from the exhaust grille.
 Dispose of the used exhaust filter.
 Insert a new exhaust filter into the exhaust grille.
 Reinsert exhaust grille with exhaust filter.

Troubleshooting

Decreasing cleaning power
Note:
The amount that can be vacuumed up can vary depend-
ing on the vacuuming material.
If the cleaning power of the appliance deteriorates
please check the following:
 Accessories, suction hose or suction pipes are
clogged.
 Remove the clog with a suitable aid.
 Flat fold filter and/or coarse dirt filters are dirty.
Illustration
 Clean the filters.
Illustration
 Tap on the flat fold filter and clean it under running
water.
If necessary, replace the flat fold filter with a new
one.
 Exhaust filter is very dirty or has not been changed
regularly.
I
1
Illustration
 Replace old exhaust filter with a new one.
The device switches off automatically
 To avoid overheating due to clogging of the acces-
sories (e.g. suction hose, suction pipes, exhaust fil-
ter), the device switches off automatically (thermal
protection contact).
 Remove the clog with a suitable aid.
 Clean the filters.
See chapter "Declining suction performance".
 After cleaning and cooling, vacuuming operations
can be resumed.

Technical specifications

AD 2
Voltage
Current type
Rated power input
Mains fuse (slow-blow)
Protective class
Weight (without accessories)
Container capacity
Action radius
Dimensions
Sound power level L
Subject to technical modifications!
AD 4 Premium
Voltage
Current type
Mains fuse (slow-blow)
Protective class
Weight (without accessories)
Container capacity
Action radius
Dimensions
Eco design as per 666/2013
Energy efficiency category
Indicative annual energy con-
sumption
Carpet cleaning class
The floor nozzle supplied is not
suitable for use on carpets.
Hard floor cleaning class
Dust emission class
Sound power level L
Rated power input
Subject to technical modifications!
– 10
EN
220 - 240
50-60
600
10
II
4.4
14
5.3
ø 345 x
330 x 440
82
WA
220 - 240
50-60
10
II
5.3
17
7.0
ø 365 x
330 x 565
A+
20.1
-
B
B
80
WA
600
V
Hz
W
A
kg
l
m
mm
dB(A)
V
Hz
A
kg
l
m
mm
kWh/a
dB(A)
W
17