Important Safety Instructions - Kemper PROFILER Guía Rápida

Settings
You can find the LCD CONTRAST knob on the rear side of the Remote. All other settings are edited and memo-
rized within the Profiler's System menu. Consequently, these are also included in the Profiler backups. The Refer-
ence Manual includes a dedicated "Profiler Remote and Looper" chapter, which covers all relevant information.
Cabling
The Profiler and Remote communicate with each other via an ethernet cable. The cable included in the Remote
package with its Neutrik® etherCON® cable connector carrier has been carefully selected, and is perfectly suited
for this purpose. If you decide to use any 3rd party cable, please make sure it meets our quality standards. Cables
in excess of 10m (30ft) might require an extra power supply. This way, distances of more than 100m (300ft) can
be bridged. Details can be found in the Reference Manual.

Important safety instructions

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
• Only use attachments/ accessories specified by the manufacturer.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-
aged in any way, such liquid has been spilled or the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• The apparatus shall not be exposed to drippings or splashing and no objects filled with liquids (such as
drinking glasses) shall be placed on the apparatus.
• The apparatus is not for outdoor use.
QUICK GUIDE 11