Hydromassage; Suggestions For Use - Jacuzzi delfi Manual De Uso Y Mantenimiento

Hydromassage

C
aressing water to pamper your body and relax your mind.
Excellent against stress, the hydromassage helps relieve muscle
tension and improves your mood.
To start the hydromassage:
Press the key "Pump"
speed; the respective LED will flash. Press it again to go to high
speed (the LED will be on and steady).
Press the button a third time to shut down the pump (the LED
turns off ).
The pump continues to operate for about 20 minutes, but it
can be deactivated by pressing the key again.
NOTE: if the electrical consumption limiter has been activated (see
the installation manual), when you turn on a pump, at high speed,
the heater will be turned off, if it is on.
once to start the pump at low

Suggestions for use

The heart of the hydromassage of the spas is a system of hydrojets.
They are designed to stimulate various parts of the body depending
on where they are positioned. There are soft, gentle jets to enjoy true
relaxation, or more energizing jets to rest and revitalize.
These nozzles act on the most sensitive areas
of the neck and back with a constant, ultra-
intense jet that eliminates muscular tension. it
is possible to adjust the direction of the nozzle
(but turning it) as well as its flow rate (turning
the outer ring nut).
The spiral jet that characterizes these jets gen-
erates an increasing flow of air and water that
performs an invigorating massage on large
muscle groups; also the flow rate can be ad-
justed (turning the outer ring nut).
These nozzles generate a rotating flow of wa-
ter, to massage the lumbar area of the back
and the feet. It is also possible to adjust the
intensity; also the flow rate can be adjusted
(turning the outer ring nut).
This type of jet generates a localized flow,
which creates a spiral of air and water, perfect
for stimulating medium-sized groups of mus-
cles; also the flow rate can be adjusted (turn-
ing the outer ring nut).
This type of jet provides a consistent and ad-
justable jet, thanks to a higher air/water ratio;
also the direction of the nozzle and the flow
rate can be adjusted (by turning it).
21 21