Remote Control Battery Installation; Install The Remote Control - Steren MP4-300 Manual De Instrucciones

4.- REMOTE CONTROL BATTERY INSTALLATION

5.- INSTALL THE REMOTE CONTROL

2.- Pull the velcro tape and place the base on the steering wheel.
3.- Insert the remote control into base, matching the slots of both pieces.
8
1.- Remove the remote control´s base pulling the two pieces apart.
1. The remote control uses a CR2025 button type
battery.
2. To install or replace a battery, press the left fl ap and
pull the compartment out.
3. Place the battery with the positive polarity upward,
then replace the
compartment.