Deleting fi les from the transmitter
1.- Using a USB (male-male) cable connect the transmitter to a computer. Wait for the computer to recognize
the transmitter and access it.
2.- Once you have accessed the transmitter, select the images, folders or MP3 fi les you wish to delete and use
the delete function to remove these from the transmitter.
3.- To safely disconnect the transmitter, exit all active applications and folders on the transmitter, then right-click
on the external hardware icon that is in the bottom right corner of the screen in the task bar. Select "Safely
Remove Hardware" and from that menu select the transmitter.
When the system indicates you may safely remove the hardware, disconnect the transmitter from the USB port.
Do not remove the transmitter when it is in use. Doing so could damage the device and result in loss of data.
Steren is not responsible for any loss of data. Do not format the device.
Viewing videos / images from a USB drive or SD MMD card
5.- If you wish to view the images of your external drive (USB or SD/MMC card) press and hold the
the options menu and select PHOTO, or if you wish to view videos chose VIDEO.
6.- Use the << and >> buttons on the transmitter, or the
through the images/videos.
7.- To exit this mode and return to the main menu, simply press and hold the
16
1.- Connect the transmitter to the automobile's DC connector
(cigarette lighter).
2.- Turn on the car stereo and select the radio function.
3.- Set the switch on the MP4-300 to the ON position.
4.- Insert a USB drive or SD/MMC card that contains JPEG or GIF
format images or .SCV format videos.
/
buttons on the remote controls to navigate
button.
7.- OPERATION
until you