Steren MP4-300 Manual De Instrucciones página 34

1.- Click on the MOVIE tab.
2.- Select the folder where the videos you wish to import are located. Take into account that the video formats
that can be converted by the program are: .mp4, .mov, .avi and .mpeg
3.- From the OPTION menu, select SETTINGS and set the frame size to 128x128 and select the video quality
in which you would like to save the video: Low, Normal, or High. To save these changes, click Accept.
4.- Check the box next to the videos you wish to save on the transmitter.
5.- In the MP3 RESOURCE menu select the MP4-300.
6.- To begin the conversion and transfer of videos, click START. Wait for the progress bar to show that the
process is fi nished.
- Once this process is fi nished, close the program and safely disconnect the transmitter. To do this, exit all
active applications and folders on the transmitter, then right-click on the external hardware icon that is in the
bottom right corner of the screen in the task bar. Select "Safely Remove Hardware" and from that menu select
the transmitter.
Once your computer indicates that you may safely remove the device, disconnect it from the USB port.
Do not disconnect the device while it is in use. Doing so may damage the device as well as important fi les
contained within. Steren is not responsable for any loss of data that may occur in this manner. Do not format
the device
- Follow the steps in the section titled Connection (page 9) to use the transmitter in your automobile.
- Turn on the transmitter, press and hold the
appears and select MOVIE.
- Adjust the volume level using the +/- buttons of the remote controls or press and
hole the buttons << (lower) / >> (raise) of the MP4-300. To change to another
video use the << and >> buttons.
- To exit this mode and return to the main menu, simply press and hold the
button.
14
button until the options menu
7.- OPERATION
MOVIE