Cleaning And Maintenance - Sonia Maia H2201 Manual De Instrucciones

- When running, the
- When paused or on standby, the
light up.
OPERATION
● Connect the device and leave it in standby mode
with the indicator lit.
● Soften the skin in the area to be treated using a
sprayer or clean water.
● Select the type of wave to be used, the operating
time and set the power to minimum.
● Press
up.
● Then gradually set the power to the level required
for the treatment.
Bear in mind:
● Do not use the skin scraper spatula for a long time,
especially in the case of sensitive skin.
● Control the force you use with the spatula when
scraping. Use at a 45-degree angle to the skin.
● Remember to keep applying product to the skin
to keep it moisturised while performing a surface
massage.

CLEANING AND MAINTENANCE

● Before cleaning the device, unplug it from the
mains.
● Clean the device with a soft, dry cloth. Do not use
liquids to clean it.
● After each use, the various components and
accessories must be sterilised and left to dry.
● For maintenance or repairs of any part of the
product, please contact your distributor or
specialised technician.
RECYCLING
If you need to dispose of the product or any of its
parts or accessories, please check and respect the
laws and regulations applicable to waste management
and environmental protection.
EN
4
indicator will light up.
indicator will
and the run indicator will light