Petsafe UL-275 Manual De Funcionamento página 3

picture.The unit will not work with the tape
ried over the battery.
Inserting the Battery Module – Insert the
that
module by aligning the battery module arrow
with the small arrow on the side of the case,
e and press the module down into the battery
compartment. Place a coin in the slot as
shown, and turn the coin clockwise until it
a
stops.The battery module arrow should now
m 9
be aligned with the lock symbol.
Testing the System
ow
Changing the Correction Level - The correction
levels change incrementally from the current
eries
level and revert back to 1 from 5. Refer to the
Receiver LED Function and Response table
to choose the correction level that best fits your pet. Remove the switch cover
with a small coin. With battery installed, press the small button on the back of
the receiver until LED lights and release. The LED will then flash to show the
current correction level. To change to the next level, push the button in again
once the last flash has been displayed. Please note that the button must be
e
400-523-19-1 3
3
6/27/03, 8:14 AM