Petsafe UL-275 Manual De Funcionamento página 4

Receiver LED Function and Response
Receiver LED
Function
Correction Level 1
Correction Level 2
Correction Level 3
Correction Level 4
Correction Level 5
Low Battery
pressed within 5 seconds from the last flash to change to the next level. After
setting the correction level, replace the switch cover to protect the switch from
the outside environment.
Testing the Receiver - Attach the test light to the probes according to the
picture. Walk towards the boundary wire until the test light begins to flash.
This will indicate the system is functioning properly.
If the test light did not flash, check the battery installation, and be sure that
the probes are secured hand tight.
4
400-523-19-1
Correction
No Correction,
Beep Only
Low Correction
Medium Correction
Medium High
Correction
High Correction
4
LED Indicator
Light Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
Flashes every
4-5 seconds
6/27/03, 8:14 AM
Size of Dog
Training Only
Less than 20lbs
20lbs - 50lbs
Greater than 50lbs
Hard to Train Pets
Plac
Whe
dog's
wher
touc
dog's
cont
dog's
longe
your
NOT
you a
prob
CAUT
for lo
Necr
deter
regul
repla
clean