Designers Edge HEAT ZONE H-12000 Manual Del Usuario página 5

• Use only on 15 ampere branch circuit.
• Use with AC current only
• Do not place objects such as furniture, papers, clothes and curtains closer
than 5' to the front of the heater and keep them away from the sides
and rear when the heater is plugged in.
• Avoid the use of an extension cord because the extension cord may over
Keep combustible materials such as furniture,
paper, clothes and curtains at least 5' (1.5m) from the
front of the heater and away from the sides and rear.
TABLE 1: SPECIFICATION
Minimum mounting
Minimum mounting
distance from ceiling
Minimum distance
from side wall when
ceiling mounted
WARNING: This appliance MUST be grounded.
If the supply cord becomes damaged, it must be replaced by the manu-
hazard. Otherwise, the plug should be connected to a socket indoors.
MOUNTING
1. Securely fasten the heater to the bracket arm using the nut and
bolt supplied
2. Mount bracket backplate to mounting surface with 3 screws provided
3. Mount the heater on to the backplate by inserting bracket arm into backplate.
4. Insert locking pin to connect arm with backplate
H-12000_inst.indd 5
CAUTION: RISK OF FIRE
8'2"
1' 5 / "
7
8
5'
INSTALLATION
5/20/08 9:37:08 AM