Installation; Installing The Light - HAMPTON BAY 49603-300MG Guía De Uso Y Mantenimiento

Installation

Installing the light

NOTE: Do not use a hammer. If the ground is hard, use water to
soften.
NOTE: Prior to use, set the AUTO/OFF switch located on the
back plate of the top cap to the AUTO position, and allow it to
charge a full sunny day.
Insert the ground stake (D) firmly into the ground at the installation location. If the ground is too hard, soak the ground with water to soften
□
the ground or drive a metal rod or screwdriver into the ground to create a hole for the ground stake (D).
Connect the pole (C) to the ground stake (D).
□
□ Connect the lamp housing assembly (A & B) to the pole (C).
4