Craftsman CMXGZBF7124441 Manual De Instrucciones página 8

EnglIsh
inStrUCtiOnS fOr 917 mODeL trACtOrS
Step 1: (fig. 13)
1. Assemble one angle support bracket (16) to the
topmost set of holes in the hanger brackets using
two 3/8" x 1" hex bolts (D) and 3/8" nylock nuts (M).
Assemble the second angle support bracket to the
second from the bottom set of holes in the hanger
brackets using two 3/8" x 1" hex bolts (D) and 3/8"
nylock nuts (M). Be sure the angle support brackets
are turned as shown. Do not tighten yet.
Fig. 13
3/8" x 1"
HEX BOLT (D)
3/8" NYLOCK
NUT (M)
Step 2: (fig. 14)
1. Assemble the pivot support bracket to the angle
support brackets using four 3/8" x 1" hex bolts (D) and
four 3/8" nylock nuts (M). Do not tighten yet.
Tighten the 4 bolts fastening the angle support
2.
brackets to the hanger brackets.
3. Tighten the 4 bolts fastening the pivot support
bracket to the angle support brackets.
gO TO PAgE 7 FIgURE 19
4.
Fig. 14
3/8" x 1"
HEX BOLT (D)
6
ANGLE SUPPORT
BRACKET (16)
3/8" NYLOCK
NUT (M)
PIVOT SUPPORT
BRACKET
inStrUCtiOnS fOr 247 mODeL trACtOrS
Step 1: (fig. 15)
1. Attach an angle support bracket (23) to the top holes in
the quick attach brackets using two 3/8" x 1" hex bolts
(D) and 3/8" nylock nuts (M). Do not tighten.
2. Attach an angle support bracket to the bottom holes in
the quick attach brackets using two 3/8" x 1" hex bolts
(D) and 3/8" nylock nuts (M). Do not tighten.
Fig. 15
3/8" x 1"
HEX BOLT (D)
BEND
FACES
IN
Step 2: (fig. 16)
1. Assemble the pivot support bracket to the slotted
angle support brackets using four 3/8" x 1" hex bolts
(D) and four 3/8" nylock nuts (M). Do not tighten
yet.
Tighten the 4 bolts fastening the slotted angle
2.
support brackets to the quick attach brackets.
3. Tighten the 4 bolts fastening the pivot support
bracket to the slotted angle support brackets
Fig. 16
3/8" x 1"
HEX BOLT (D)
3/8" NYLOCK
NUT (M)
BEND
FACES
OUT (23)
3/8" NYLOCK
NUT (M)
PIVOT SUPPORT
BRACKET