Troubleshooting - Steren DVD-100 Manual Del Usuario

TROUBLESHOOTING

Problem
No Power
I can't play the disc even when
PLAY has been pressed
The playback has begun but it
stops immediately
No image
The image distorts during fast
forward/rewind
There is no sound or it is distorted
The remote control is not
functioning
The subtitles or the audio is not the
one I selected
No information is displayed on the
screen
The menu is being displayed in a
strange language
Playback does not begin even
when I press the PLAY button
I cannot fast forward/rewind
I cannot change the view angle
Make sure to connect the power cable
Make sure the disc is inserted with the
Make sure the disc is clean
The disc may contain condensation.
Allow it to dissipate completely.
Make sure the device is correctly
Power your TV on.
Make sure that the video input on the TV
is selected correctly.
It is normal for the image to be distorted
during this function
Make sure the device is correctly
Make sure the input connectors and the
volume adjustment is set correctly on the
TV or monitor
There is not supposed be sound when
the image is in pause, fast forward, or
The batteries in the remote control might
need to be replaced
Make sure to point the remote control
directly at the DVD player
Remove any obstacle between the
remote control and the DVD player
It is probable that the subtitle/audio you
desire is not available on the DVD
Press the DISPLAY button on your
remote control
Change the language parameters on the
The rating level has been activated in
order to restrict certain types of content
Some discs do not allow for this function
Make sure that the disc you are viewing
has multiple angles
ENGLISH-30
Solution
properly
label side up
OSD menu
to work