Sears Kenmore 796.4128 31 Serie Manual De Uso página 26

MAINTENANCE
Cleaning the Water Inlet Filters
If the washer does not fitt properly, an error message
will show on the display. The inlet valve filter screens
could be plugged by hard water scale, sediment in the
water supply, or other debris.
NOTE: The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that could
enter the valves with the water supply. Operating the
washer with these filters removed could cause a valve to
fail to open, resulting in flooding and/or property
damage.
@ @
Inlet Filter
O Turn OFF both water faucets completely. Unscrew
the hot and cold water lines from the the back of the
washer.
Carefully remove the filters from the water valves and
soak them in white vinegar or a lime scale remover, fol-
lowing the manufacturer's instructions. Be careful not to
damage the filters while cleaning.
O inse thoroughly before reinstalling. Press the filters back
into place.
O Before the flush the hoses and
reattaching hoses,
water
lines by running several gallons of water through the
hoses and into a bucket or drain.
26