Sears Kenmore 796.4128 31 Serie Manual De Uso página 28

Lavadora automatica de carga frontal
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Should you experience
any problems with your
washing machine, it has the capability
of transmitting
data via your telephone
to the Kenmore Connect
Team. This gives you the capability
of speaking
directly
to our specially
trained technicians.
The
technician
records the data transmitted
from your
machine and uses it to analyze
the issue, providing
a
fast and effective
diagnosis.
Using the Kenmore
Connect
TM
System
Follow the technician's
instructions and perform
the following
steps when requested.
If you experience
problems with your washer, call
1-800-4-MY-HOME
®. Only use the Kenmore Connect
System feature when instructed
to do so by the
Kenmore Connect Team. The transmission
sounds that
you will hear are normal and sound similar to a fax
machine.
Kenmore Connect cannot be activated
unless your
washing machine is turned on by pressing the POWER
button. If your washing machine is unable to turn
on, then troubleshooting
must be done without
using
Kenmore Connect.
HOLD
the mouthpiece
of your phone over the POWER button, when instructed
to do so by
the call center, no more than one inch from (but not touching)
the machine.
NOTE: Do not press any other buttons or turn the cycle selector knob.
PUSH
and hold the WASH TEMP button while continuing
to hold your phone to the
POWER button.
LISTEN
for three beeps. After you hear the three beeps, release the WASH TEMP button.
Keep the phone in place until the tone transmission
has finished. This takes about 6 seconds,
and the display will count down the time. Once the countdown
is over and the tones have
stopped,
resume your conversation
with the technician,
who will then be able to assist you in
using the information
transmitted
for analysis.
NOTE:
* For best
results_ do not move
the phone
whiie
the tones
are
being
transmitted.
"
If the caii
center
agent
is not
abie
to
get
an
accurate
recording
of
the
data_
you
may
be
asked
to
try again.
. Pressing
the POWER
button
during
the transmission
wiii
shut off: Kenmore
Connect.
28

Publicidad

Tabla de contenido
loading

Tabla de contenido