Hamilton Beach OG03 Manual De Montaje Y Operacion página 10

ASSEMBLY
STEP 1: Cart
(cont.)
2. Attach the wing nut onto the bolt and tighten as shown in Fig. 2a.
3. Attach M6 x 12 screw to four support plates and tighten with hex key (provided) as shown in
Fig. 2b.
4. Using the hex key, tighten each M6 x 12 screw holding the other end of the crossbars, as
shown in Fig. 2c.
5. Place the accessory hooks (4) onto the bumpers on the side panels as shown in Fig. 2d.
Fig 2a
Fig 2d
10
ASSEMBLY STEPS
Fig. 2
Fig 2b
Fig 2c