Hamilton Beach OG03 Manual De Montaje Y Operacion página 14

ASSEMBLY
STEP 4: Door
1. Insert the fi xed lower-left door pin into the hole on the bottom shelf. Push down the spring-
loaded upper door pin, aligning it beneath the hole in the upper-door pin bracket, and release
pin so that it inserts into the hole as shown in Fig. 5a. (NOTE: Side shelves omitted in Fig. 5a
for clarity.)
2. Repeat part 1 of this step for the right door.
3. Insert the match holder bracket into the hole on the inside of right door; then put the match
holder in it and capture it as shown in Fig. 5b.
Fig. 5a
14
ASSEMBLY STEPS
Spring-
Loaded Pin
Fixed Pin
Fig. 5b