Hamilton Beach OG03 Manual De Montaje Y Operacion página 13

ASSEMBLY
STEP 3: Right-Side Shelf
3. Place side burner grate on side burner as shown in Fig. 4e.
4. The side burner is now fully assembled. This step (part 4 of STEP 3: Right-Side Shelf) is
only necessary if you fi nd later that you cannot light the side burner by using the side burner
knob. Often, this is caused by poor alignment of the igniter tip with a hole in the side burner.
To adjust this alignment, grab the igniter tip with a pair of needlenose pliers as shown in
Fig. 4. Using gentle force, move the position of the tip so it is about 1/8" from the bottom
of one of the holes in the burner, as shown in Fig. 4g.
Fig. 4f
ASSEMBLY STEPS
(cont.)
Fig. 4e
Fig. 4g
13