Kohler K-T13140 Guia De Instalacion página 4

Spout Base
Apply
plumbers
putty to
spout base.
Spout
Supply
Tube
2. Install Spout
CAUTION: Risk of product damage. Use care when installing
the spout assembly to prevent damage to the O-ring seal on the
sleeve.
Apply a ring of plumbers putty or other sealant around the
underside of the spout base according to the manufacturer's
instructions.
Position the spout base over the spout supply tube.
Check that the spout base rests on the rim, finished deck, or tile
surface.
Back off the two setscrews in the sleeve, and with a twisting
motion install the sleeve on the spout supply tube until it contacts
the spout base.
Align the sleeve so the setscrews are not facing directly forward
or backward.
Tighten the sleeve setscrews.
Install the spout onto the sleeve, and carefully press down until
the spout contacts the spout base.
Align the spout and tighten the spout setscrew.
Press the plug button into the setscrew hole.
1036138-2-A
Plug
Button
Spout
Setscrew
Setscrew
Sleeve
Setscrew
4 Kohler Co.