Replacing The Batteries; Technical Specifications - tibelec 975840/EM-401A Manual Del Usuario

Replacing the batteries :

When the symbol
- Turn the selector to Off
- Loosen the screw on the back of the clamp
- Open and replace the batteries in the corresponding area with
batteries of the same type (3xLR03/AAA 1,5V)
- Tighten again.
The consumer is obliged by law to recycle all used batteries and accumulators.
It is forbidden to throw them in the ordinary bin! Refer to the environmental
protection details.

Technical specifications

• Exceedance indication: "OL" (Over Limit) displayed
• Automatic switch-off: the tester automatically turns off if it hasn't been used for 15
minutes
• Sampling rate: 3 times per second
• Operating temperature: 0°C~40°C
• Storage temperature: -20°C~ 60°C
• 2 x LR03/AAA 1.5V batteries included
• Size and weight: 190mm x 70mm x 38mm / 220g
• Safety standard: 600V CAT III
• Complies with standards EN 61010-1.
Certified in accordance with
European standards
Risks resulting from
hazardous voltages
Class II equipment without
ground connection
12
appears, replace the batteries with new ones.
:
For indoor use only
Do not dispose of appliances
bearing this symbol with
domestic waste. Use a suitable
collection point