iHealth BP5S Guía De Usuario página 66

The monitor will not work until the battery has enough power.
• When the monitor needs charging, please connect the monitor to a power source.
• You should charge the battery when the battery is less than 25% charged. Overcharging the
battery may reduce its lifetime.
• When in charging mode, the charging status will be displayed on the LED screen. See the table
below for details.
Monitor Status
Charging
Fully charged
Battery charge <25%
Battery low
Do not change the battery. If the battery can no longer be charged, please contact Customer Service.
Overcharging the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could result in a hazard such as
a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with wet hands. If the AC
adapter is abnormal, please change the adapter.
Do not use the monitor while charging.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, cable, battery and cuff must be disposed of according to local regulations at
the end of their usage.
Note: The battery has limited charge cycles and may eventually need to be replaced by an iHealth
service provider. Battery life and charge cycles vary by use and settings.
TROUBLESHOOTING
Status Indicator
battery/charge symbol flashing slowly
battery/charge symbol steady
battery/charge symbol flashing fast
battery/charge symbol flashing fast
13