Setup
1. Make sure all items listed in the
foam sheet for the power cable and microphone.
2. Read the Safety & Warranty Manual before using the product.
3. Study the
Connection
4. Make sure all input devices (such as microphones, CD players, or digital media players) are turned
off with their volume settings set to "zero."
5. Connect all devices as shown in the Connection Diagram.
6. Switch everything on in the following order:
• Audio input devices (e.g. microphones, instruments, CD players)
• Power Glow 200
7. When you are finished using Power Glow 200, switch everything off in the following order:
• Power Glow 200
• Audio input devices
Connection Diagram
Items not listed under the
Microphone
SD Card
4
Box Contents
Diagram.
Box Contents
are sold separately.
Tablet
are included in the box. Look in the box under the
USB drive
Smartphone
Power