Bryton Rider 50 Guía De Consulta Rápida página 5

4. Plug the power adapter to a wall
outlet.
NOTE:
• Charge the Rider 50 for at least 4
hours before you start using it.
• You can also charge the Rider
50 using your computer but
recommended to turn off the Rider
50 to ensure the battery will be
fully charged.
The Rider 50 may come with different
plug head(s) suitable in the country
where you purchased the device.
To use the plug:
3
2
1
4
Rider 50 Quick Start Guide
1. Pull up the default plug.
2. Press and hold the tab.
3. Insert the plug head.
4. Release the tab to lock the plug
head and push the plug down.
Step 2: Install Map
MicroSD Card
Insert a micro SD card with the golden
contact area facing downwards as
shown on below illustration.
NOTE: Maps are already preloaded
in the microSD card. Map DVD is for
recovery purpose only.
5