Thank You For Choosing Sterling
We appreciate your commitment to Sterling value. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers are listed on the back cover.
Thanks again for choosing Sterling.
Tools and Materials
Safety Glasses
Drill
Silicone Sealant
Masking
Tape
Before You Begin
Observe all local plumbing codes.
Shut off the hot and cold water supplies.
Unpack the new sink and carefully inspect for damage.
Verify that all included materials are present.
Included Materials
• (1) Sink
• (8) Mounting Clips
• (8) 1/4" x 20-5/8" Slotted Hex Head Screws
• (1) Installation Guide
Return the sink to its carton until it is time to install it.
Illustrations shown may not represent your actual product.
1025454-2-B
Pencil
Tape
Measure
Plus:
• Jigsaw
• Rags
Hollow Shaft
• Hammer
1/4" Nut Driver
2
Phillips
Screwdriver
Sterling