Saivod PA-207 Manual Del Usuario página 14

with food, thanks to refer to the below paragraph of the
manual.
The appliances are not intended to be operated by means of
an external timer or separate remote-control system.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
The details on how to clean surfaces in contact with food,
please refer to following "How to clean" part.
The surfaces marked with are liable to get hot during use.
This product is for household use only.
HOW TO USE
Fig. A.
Before using for the first time, become familiar with the griddle features, Fig. A. Wash griddle in
dishwasher or in warm sudsy water, rinse, and dry. Do not immerse heat control or let the heat
control come in contact with any liquid. "Season" the nonstick cooking surface by rubbing
lightly with cooking oil. Remove excess oil with paper towel.
1. Place griddle on a dry, lever surface. To prevent possible heat damage to your countertop, place
a heat resistant counter protector, such as aluminum foil, under appliance.
2. Insert heat control into appliance. Be sure the control is inserted into the electrical pins on
the appliance. Connect cord to a polarized outlet only. As a safety feature, this appliance has a
polarized plug(one blade is wider than the other). This plug will only fit in a polarized outlet one
way. If the plug does not fit fully in the outlet, reverse the plug, If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
3. Turn heat control to desired temperature. Preheat griddle. Pilot light goes off when selected
temperature is reached. During cooking, pilot light will go on and off indicating desired temperature
is being maintained.
4. Prepare food for cooking. Because the griddle features a nonstick finish, food may be prepared
with little or no oil.
14
PA-207.indd 14 6/22/2016 3:34:09 PM