Care And Cleaning - Saivod PA-207 Manual Del Usuario

CARE AND CLEANING

Before initial use and after each subsequent use, wash griddle in warm sudsy water, rinse, and
dry. Do not immerse heat control in water or let it come in contact with any liquid.
For best results use nylon, plastic, wooden, or rubber utensils. Do not use metal utensils as they
may scratch the nonstick surface. Do not cut foods on the cooking surface.
If there is any food residue remaining on the cooking surface or on the cool-touch base, it
should be removed after each use. To do so, scrub gently with a mild abrasive, such as a fine
cleansing pad-nylon mesh or other ordinary cleansing pad. Do not use steel wool or abrasive
kitchen cleaners.
In time, the nonstick finish may darken over the heating element. To remove this discoloration,
use a commercial cleaner designed for cleaning surface. These cleaners are available at most
grocery and hardware stores. For best results, follow the manufacturer's instructions, being
careful that any cleaning solution coming in contact with the cool-touch base or the exterior of
the appliance is wiped off.
Some discoloration may occur inside the griddle drip tray. This is normal. The amount of
discoloration will vary depending on the foods cooked and the temperature setting used. This
discoloration is only visible from the inside of the drip tray and will not affect the performance
of the griddle.
After treating the griddle with a commercial cleaner, it is recommended that the cooking surface
be wiped lightly with cooking oil before using.
The cool-touch base on the griddle is easy to keep attractive and looking new. Simply wipe away
spills and drips as they occur. Any food residue remaining can be whisked away with a gentle
stroke of a nylon mesh pad. Rinse and wipe dry.
IMPORTANT: To insure continued accuracy of the heat control, avoid rough handing in use and
storage.
SAVE THESE INSTRUCTIONS
When the time comes to eliminate this product, please consider the environmental impact and
take it to recognised recycling facility instead of disposing it with general household waste. Take
the equipment to a waste disposal site. Plastic and metal parts that are used in the construction
of this appliance can be separated into pure grade which allow recycling. Ask to your service centre for
details. Everyone of us can participate on the environmental protection.
16
PA-207.indd 16 6/22/2016 3:34:09 PM