Before Use - Taurus Alpatec SNOWFIELD MINI Manual De Instrucciones

Ocultar thumbs Ver también para SNOWFIELD MINI:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
appliance.
INSTRUCTIONS
FOR USE

BEFORE USE:

- Make sure that all products'
packaging has been removed.
USE:
- Extend the cable completely
before plugging it in.
- Fill up both tanks with cold
water. It is recommended
to put the water tanks in the
refrigerator for a few hours to
maximize the cooling effect.
- Connect the appliance to the
mains.
- Turn the appliance on, by
using the on/off button (B).
- Select the desired speed
pressing the speed selector
button (C).
AMBIENT LIGHT:
- Press the ambient light button
(D) to select the desired color
or the color-changing mode.
For every press, the color will
change once.
ONCE YOU HAVE FINISHED
USING THE APPLIANCE:
- Turn the appliance off, using
the on/off button (B).
- Clean the appliance.
CLEANING
- Disconnect the appliance
from the mains and allow it to
cool before undertaking any
cleaning task.
- Remove the absorvent panel
to facilitate the cleaning pro-
cess. To remove it, the tanks
must be removed first.
- Clean the equipment with a
damp cloth with a few drops
of washing-up liquid and then
dry.
- Do not use solvents, or pro-
ducts with an acid or base pH
such as bleach, or abrasive
products, for cleaning the
appliance.
- Never submerge the appli-
ance in water or any other
liquid or place it under running
water.
- If the appliance is not in good
condition of cleanliness, its
surface may degrade and in-
exorably affect the duration of
the appliance's useful life and
could become unsafe to use.

Publicidad

Tabla de contenido
loading

Tabla de contenido