Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
f.
Detergent Siphon hose (not shown): Feeds cleaning agents into the pump
to mix with the water. See how To Apply Chemicals/Cleaning Solvents
instructions in Operation section.
G. handle
h. frame
I.
Pump Outlet
J.
Pump Inlet
k. Quick Connect Nozzles
L.
hose Storage Strap
BASIC ELEMENTS OF AN ENGINE
Refer to the Engine Owner's Manual for location and operation of engine controls.
Choke Control: Opens and closes carburetor choke valve.
Starter Grip: Pulling starter grip operates recoil starter to crank engine.
Engine Switch: Enables and disables ignition system.
ASSEMBLY INSTRUCTIONS (FIG. 2–6)
1.
Locate and remove all loose parts from the carton.
2.
Cut four corners of the carton from top to bottom and lay the panels flat.
3.
Slide the axle pin through the wheel, formed washer, frame and other formed
washer as shown in figure 2. Slide clip through hole in axle pin to secure wheel
in place. Repeat steps for second wheel.
2
4.
Place handle (G) onto frame (H), depress the snap buttons, and slide the
handle assembly onto the frame until snap buttons snap into place
NOTICE: Risk of personal injury. Avoid placing hands between handle and frame
when assembling to prevent pinching.
5.
Remove the colored quick-connect nozzles (K) from the plastic bag and insert
them into correct grommet on the nozzle holder. Nozzles are color coded to
match colored nozzles on label (Q).
3
G
h
12- ENG
4
k
Q
Publicidad
Tabla de contenido
