Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
pRESSURE WASHER (FIG. 15)
1.
Drain all water from high pressure
hose. Use hose storage strap (L) to
secure high pressure hose (C) for
storage.
2.
Drain all water from the spray gun
and wand by holding spray gun (D)
in a vertical position with nozzle end
pointing down and squeezing trigger.
Store in gun holder.
3.
Wrap up and secure detergent siphon
hose so it is protected from damage.
DANGER: Risk of fluid injection. When using replacement spray wands or
guns with this pressure washer, DO NOT use a spray wand and/or spray gun/
wand combination that is shorter in length than what was provided with this
pressure washer as measured from the nozzle end of the wand to the gun
trigger.
NOTICE: The use of any other accessory not recommended for use with this tool
could be hazardous. Use only accessories rated equal to or greater than the rating
of the pressure washer.
Model
PSI Max*
GPM Max*
High Pressure Hose
Presure of Inlet Water
Inlet Water
Soap Consumption Rate
* R ated Pressure and Rated Water Flow is within manufacturing tolerance of
(+/- 10%).
In a continued commitment to improve quality, the manufacturer reserves the right
to make component changes, design changes, or specification changes when
necessary and without notice.
Do not return this product to your retailer. Please contact our customer service
department at 1-877-362-4271
15
ACCESSORIES
SpECIFICATIONS
DCV2420
2400 psi
2.0 gpm
25 ft. (7.6 m)
20–100 psi
cold tap
10% max
SERVICE INFORMATION
19 - ENG
D
L
C
Publicidad
Tabla de contenido
