Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for part 99-7617HG
Nissan Altima
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted high gloss gray
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552
Antenna Adapter: • 40-NI12
Steering wheel control interface: • ASWC-1 (sold separately)
METRA - The World's best kits
®
2013-2015
(Sedan)
99-7617GHG
C
®
D
metraonline.com
U.S. PATENT # D757,707
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ....................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Metra 99-7617GHG
Resumen de contenidos para Metra 99-7617GHG
- Página 1 Also, do not remove the factory radio with the key in the Steering wheel control interface: • ASWC-1 (sold separately) on position, or while the vehicle is running. METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION...
- Página 2 ® 99-7617HG Dash Disassembly 1. Unclip the right side of the driver’s 5. Remove the climate control panel. knee bolster panel next to the (Figure D) center console and let hang. 6. Remove the a/c vent panel. (Figure A) (Figure E) Note: There is no need to 7.
- Página 3 (Figure C) 5. Locate the factory wiring harness and antenna connector in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 6. Reassemble the dash in reverse order of disassembly.
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION...
- Página 5 Interfase de control en volante: • ASWC-1 (se venden por separado) con el vehículo funcionando. METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION...
- Página 6 ® 99-7617HG Desmontaje del tablero 1. Desenganche el lado derecho del 5. Quite el panel del control del clima. panel protector de rodillas del (Figura D) conductor junto a la consola central 6. Retire el panel de ventilación de y déjelo colgando. (Figura A) aire.
- Página 7 (Figura C) 5. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 6. Vuelva a armar el tablero al revés de...
- Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). METRA - The World’s best kits ® metraonline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION...