Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 3/8" Phillips screws
A
B
Metra. The World's Best Kits.
®
Nissan Altima
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted black
C
D
MetraOnline.com
2016-2018
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-7617B
I N S TA L L AT I O N I N S T R U C T I O N S
U.S. Patent # D757,707
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7552
Antenna Adapter: 40-NI12
Sterring wheel control interface: ASWC-1
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 3/6/19 INST99-7617B
Publicidad
Manuales relacionados para Metra 99-7617B
Resumen de contenidos para Metra 99-7617B
- Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/6/19 INST99-7617B...
- Página 2 DASH DISASSEMBLY 1. Unclip the right side of the driver’s knee 5. Remove the climate control panel. bolster panel next to the center console (Figure D) and let hang. (Figure A) 6. Remove the a/c vent panel. (Figure E) Note: There is no need to completely 7.
- Página 3 (Figure C) 5. Locate the factory wiring harness and antenna connector in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 6. Place the radio trim panel over the radio assembly, then reassemble the dash in reverse order of disassembly.
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/6/19 INST99-7617B...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/6/19 INST99-7617B...
- Página 6 DESMONTAJE DEL TABLERO 1. Desenganche el lado derecho del panel 5. Quite el panel del control del clima. protector de rodillas del conductor junto (Figura D) a la consola central y déjelo colgando. 6. Retire el panel de ventilación de aire. (Figura A) (Figura E) Nota: No es necesario quitar el panel...
- Página 7 (Figura C) 5. Localice el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. 6. Coloque el panel de moldura de radio...
- Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y ®...