KTM 60603922044 Manual Del Usuario página 6

6
- Attach rear spring mounts
- Mount screw (included) and tighten to 25 Nm.
Final steps
- Remove the rear of the motorcycle from the lifting gear (see Own-
er's Manual).
Raising the vehicle with the center stand
- Stand to the left of the vehicle.
Hold the handlebar with your left hand and push the center stand
onto the ground with your right foot.
- Put your entire weight on the subframe arm
while pulling the vehicle up at the left grab handle until the center
stand folds out all the way.
Removing the vehicle from the center stand
- Unlock the steering and move the vehicle forward with both hands
on the handlebar.
- While the vehicle tips off of the center stand, actuate the front
brake to stop the vehicle from rolling away.
- Check that the center stand
The center stand is only designed for the weight of the motor-
cycle and the luggage. Do not sit on the motorcycle when it is
resting on the center stand. The center stand or the frame may
become damaged and the motorcycle may fall over.
(included).
of the center stand
is folded all the way up to the top.