Rotary RJ7100Y Manual De Instrucciones página 2

• Shall ensure that lift operators are qualified and that they are trained in the safe
use and operation of the lift using the manufacturer's operating instructions;
ALI/SM01-1, ALI Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card;
ANSI/ALI ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; ALI/WL Series, ALI
Uniform Warning Label Decals/Placards; and in the case of frame engaging lifts,
ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame Engaging
Lifts.
• Shall establish procedures to periodically inspect the lift in accordance with
the lift manufacturer's instructions or ANSI/ALI ALOIM-2008, American National
Standard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance; and The Employer Shall ensure that lift inspectors are quali-
fied and that they are adequately trained in the inspection of the lift.
• Shall establish procedures to periodically maintain the lift in accordance with
the lift manufacturer's instructions or ANSI/ALI ALOIM-2008, American National
Standard for Automotive Lifts-Safety Requirements for Operation, Inspection
and Maintenance; and The Employer Shall ensure that lift maintenance person-
nel are qualified and that they are adequately trained in the maintenance of the
lift.
• Shall maintain the periodic inspection and maintenance records recommended
by the manufacturer or ANSI/ALI ALOIM-2008, American National Standard for
Automotive Lifts-Safety Requirements for Operation, Inspection and Mainte-
nance.
• Shall display the lift manufacturer's operating instructions; ALI/SM 93-1, ALI
Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card; ANSI/ALI ALO-
IM-2008, American National Standard for Automotive Lifts-Safety Requirements
for Operation, Inspection and Maintenance; and in the case of frame engaging
lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference Guide for Frame En-
gaging Lifts; in a conspicuous location in the lift area convenient to the operator.
• Shall provide necessary lockout/tagout means for energy sources per ANSI
Z244.1-1982 (R1993), Safety Requirements for the Lockout/Tagout of Energy
Sources, before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior written consent of the
manufacturer.
The Owner/Employer:
2