Trouble
Lift lowers slow or not at all.
TROUBLE SHOOTING continued
Cause
1. Lift locking latch not released.
2. Release mechanism damaged or
parts missing.
3. Return flow of fluid restricted or
blocked.
4. Internal return flow restrictor is
plugged.
9
Remedy
1. Release locking latch.
2. Replace damaged or missing
parts.
3. Eliminate blockage.
If rolling jack is
WARNING
in the raised position, be sure to
activate the mechanical locking
device prior to attempting to
service the unit. Failure to do
so may cause lift to drop out of
control.
4. Have pump repaired by an
authorized service center.