GYS NEOSTART 320 Manual De Instrucciones página 10

Translation of the original instructions
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid, rinse the
Connection / disconnection:
• Disconnect the power supply before connecting/disconnecting
• The terminal of the battery that is not connected to the car frame
• After the charging process, disconnect the battery charger from
Connection:
• This device must be connected to an earthed power supply.
• This machine is fuse-protected.
• This equipment is intended for industrial environments (class A)
This hardware is compliant with the IEC 61000-3-12.
This equipment complies with the IEC 61000-3-11.
Maintenance:
• If the power supply cable is damaged, it must be replaced by the
• Service should be performed by a qualified person.
• Warning! Always remove the power plug from the wall socket
• Regularly take off the cover and remove dust with an air gun. Take
• Under no circumstances should solvents or other aggressive
10
NEOSTART 320 / 420 / 620
affected part of the body with plenty of water and seek immediate
medical assistance.
the device to/from the battery
must be connected first. The other connection must be made on
the car frame, far from the battery and the fuel line. The battery
charger must be connected to the power supply network.
the power supply network and remove the connector from the
car frame and then the connector from the battery, in this order.
and not for residential sites where the electric current is supplied
by the public low-voltage power supply network. There may be
potential difficulties in ensuring electromagnetic compatibility on
these sites, because of the conducted interferences, as well as
radiated radioelectrical frequency.
manufacturer, its service agent or an equally qualified person.
before carrying out any work on the device.
the opportunity to have a qualified person check the electrical
connections with an insulated tool.
cleaning agents be used.
EN