One for All OARI06G Manual De Instrucciones página 18

The One For All SmartControl remote can condense multi-
step activities to a single keypress. These are called "macros".
a series of steps when you're finished watching a DVD: (1)
stop the DVD, (2) turn the DVD player off, and (3) turn your
TV off.
Note: A macro can contain up to 15 steps.
1.
Press and hold the
twice.
2.
Press 9 9 5. The blue ring flashes twice.
3.
the steps to stop a DVD, turn the DVD player off, and
turn off the TV, press the
4.
Use the device select keys to highlight the device mode
for the first step in the macro.
.
5.
Press the key for the first command in the sequence.
(stop) key.
6.
If there are more commands for this device, press the
7.)
you stop the disc, press the
When you're finished with commands for this device, go
to step 7.
7.
Use the device select keys to highlight the device mode
the TV, highlight .
8.
the key.
9.
If there are more commands for this device, press the
If you're finished with this macro, go to step 10.
If you want to use another device in this activity, repeat
steps 7 and 8.
10.
Press and hold the
twice.
Congratulations! You have successfully programmed a macro.
Now when you press the key you designated as this macro
key, the remote will send the steps you programmed.
1.
Make sure the remote is pointed at the devices this
macro uses.
2.
Press the key you designated for the macro.
Leave the remote pointed at the devices for several
seconds. The macro may take a few seconds to finish.
18
key perform
key until the blue ring flashes
key to trigger
key in this step.
key.
key until the blue ring flashes