Kohler K-T467 Guia De Instalacion página 6

Lever
Handle
Assembly
Valve
Stem
Spline
4. Install the Classic Handles
Remove the plaster guards.
Close the valves (hot = clockwise, cold = counterclockwise).
Install a stem extension onto each valve stem spline. Make sure
that the splines are engaged.
Thread a handle assembly onto each valve body. Make sure the
splines in the handle and stem extension are engaged.
NOTE: The stem extension allows fine adjustment of the handle
alignment. To adjust, remove the handle and reposition the stem
extension.
Reinstall the handle and check the alignment. Repeat until the
handle alignment is satisfactory.
1023371-2-B
Cross
Handle
Assembly
Stem
Extension
Valve
Body
6 Kohler Co.