Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide - Wireless Accessories
Mount outdoor sensor
3
Error codes (Portable central controller)
If E1 or E appears, check error code number (right side of screen):
29 You are attempting to connect a Portable central controller to an incompatible
device.
34 Low signal strength. Move Portable central controller to a different location and try
again.
38 Make sure Connect light is flashing and you are 2+ feet away from wireless receiver.
69-2428EFS—03
Mount the sensor on a
vertical exterior wall, at
least 6 inches below any
overhang. Choose a location
protected from direct
sunlight.
in bracket, facing away
M28491
4
Place sensor securely
from wall.
M28492
Publicidad
Tabla de contenido
